Installing the Seat Positioning Strap | Invacare 1163141 manual

7 SEAT AND ARMS

7.8Installing the Seat Positioning Strap

For this procedure, refer to FIGURE 7.8.

1.Locate the mounting bracket (Detail “A”) under the rear of the seat.

2.Secure one side of the seat positioning strap to the mounting bracket using the bolt and nut (Detail “B”).

 The nut should go towards the center of the scooter.

3.Repeat STEPS 1-2 on the opposite side of the seat with the remaining side of the seat positioning strap.

Seat

DETAIL “C” - SEAT POSITIONING Seat STRAP INSTALLED

Positioning

Strap

DETAIL “A” -

BRACKET

Bracket

DETAIL “B” - HARDWARE

Nut	Bolt
	Bolt
	Seat Positioning
	Strap

FIGURE 7.8 Installing the Seat Positioning Strap

Invacare® Leo™ Scooter

40

Part No. 1163141

Image 40

Invacare 1163141 user manual Installing the Seat Positioning Strap, Detail C Seat Positioning Seat Strap Installed

Contents

Invacare Leo Contents Tiller Adjustment Symbols General Limited Warranty Safety General Guidelines Driving Operation Information SetupTransport Stairways and Escalators Repair or Service Information Safety/Handling of Powered Scooters Safety Safety Storage Rain Test Weight Training BatteryElectrical and Grounding Weight Limitation DisposalEMI Information Electromagnetic Interference EMI From Radio Wave Sources Powered Wheelchair Electromagnetic Interference EMI Safety Product Labeling Serial Number Label Product Labeling Technical Data Typical Product Parameters Overall DimensionsSeat Dimensions Arm Dimensions Weight Safety Inspection Checklists Inspection Inspect/Adjust Initially Inspect/Adjust Weekly Inspect/Adjust Monthly Inspect/Adjust Periodically Operating the Powered Scooter Battery Charge DisplayControl Panel Status Display Right and Left Direction Indicator Buttons Speed Control KnobHorn Button Lighting Control Panel Operating the Scooter Operating the Powered Scooter Detail a KEY Engaging/Disengaging the Brake Release Lever Pull Back to Engage Drive Push Forward to Disengage Push Engaging/Disengaging the Brake Release Lever Activating/Deactivating the Audible Signals  For this procedure, refer to Figure Audible Signal Keystroke LIT Leds Condition Combination LED Numbers Removing/Installing the Seat InstallingSeat and Arms Removing Removing/Installing the Seat Adjusting Seat Height Detail a TOP Shroud Adjusting 90 Seat Swivel Adjusting 90 Seat Swivel Adjusting the Seat Position Forward/Rearward Adjusting the Arm Width Adjusting Armrest Angle Replacing Armrest Pad Installing the Seat Positioning Strap Detail C Seat Positioning Seat Strap Installed Tiller Adjustment Adjusting the Tiller Angle Removing/Installing the Drive Wheels Wheels and Casters Removing/Installing the Front Wheels Four Wheel Models Removing/Installing the Front Wheels Three Wheel Models Removing/Installing the Front Wheels Four Wheel Models Removing/Installing the Front Wheels Three Wheel Models Batteries Recommended Battery Type Recommended Battery Type Removing/Installing the Batteries  Orient the batteries as shown in Detail B of Figure Detail a Preparing to Remove Batteries Charging the Batteries Detail a Transporting Transporting the ScooterDisassembling Rear Rear Scooter Assembling Maintenance Suggested Maintenance Procedures Troubleshooting General Troubleshooting Indicator Error Codes on Service Indicator Error Codes  For the following table, refer to .1 on Invacare Leo Scooter Invacare Leo Scooter USA