Model 1302RTS - Raised Toilet Seat with Adjustment Knob and Arms
1.Remove the plastic from the arms.
2.Install the arms onto the Raised Toilet Seat.
A.Depress both snap buttons on the arm and insert the arm into the mounting tubes.
B.Slide the snap buttons to the appropriate holes in the mounting tubes.
There will be an audible “click”. Ensure the snap buttons fully protrude through the holes in the mounting tubes.
3.Repeat STEP 2 to install the opposite arm onto the Raised Toilet Seat.
4.Put the rear wings of the Raised Toilet Seat in place underneath the
5.Rotate the Raised Toilet Seat down until the front of the seat rests on the toilet bowl. If necessary, rotate the adjustment knob counterclockwise until the bracket fits inside the toilet bowl.
6.Turn the adjustment knob clockwise to tighten the bracket against the inner surface of the toilet bowl.
Adjustment |
|
Knob | Rear Seat Wing |
Raised Toilet |
|
Seat (installed) | |
| Toilet Lip |
DETAIL “A”
Tall end of
Raised Toilet
|
| N | L |
|
|
| E | O | |
|
| T |
| O |
|
| H |
| E |
| I G |
|
| S |
T |
|
| N | |
|
|
|
|
Adjustment
Knob
Raised Toilet
Seat
Seat (installed)
Inner Ring
FIGURE 1 Removing/Installing the Raised Toilet Seat
4 Care and Maintenance
DO NOT use an abrasive detergent, cleaner or cloth to clean or dry the Raised Toilet Seat.
1.Regular cleaning of the Raised Toilet Seat is recommended. Wipe all surfaces with a damp cloth and allow all surfaces to dry before use.
2.Regular inspection of parts for deformation, corrosion, breakage, wear or compression is recommended. Replace the Raised Toilet Seat if any of these conditions exist.
Part No 1167433 | 3 | Raised Toilet Seat |