Invacare 2GR, 2GT, 2GTR Installing/Removing/Adjusting Lateral Supports

SECTION 7—BACK ADJUSTMENTS

Part No 1114842 95 2G Tarsys®Powered Seating System

Installing/Removing/Adjusting Lateral Supports

Removing Lateral Supports

NOTE: For this procedure, refer to FIGURE7.12.

1. Note the position of the existing lateral support on the back slide.

2. Loosen, but DO NOT remove, the two socket screws that secure the existing lateral

support to the back slide.

3. Slide the existing lateral support up and off the back slide.

Installing Lateral Supports

NOTE: For this procedure, refer to FIGURE7.12.

1. If necessary, loosely install the two T-nuts and hex screws onto the new lateral

support.

2. Position the new/existing lateral support and line up the T-nuts with the slots in the

new/existing back slide.

3. Slide new/existing lateral support to the desired position.

4. Tighten the two socket screws that secure the new/existing lateral support to the back