Tightening Swivel Casters
NOTE: Refer to Installation Warning on page 2.
1.Remove swivel wheel attachments from front legs by depressing snap button.
2.Hold one swivel wheel attachment with the wheel up as shown in figure 4.
3.Turn hex nut clockwise with a wrench to tighten swivel caster.
4.Repeat STEPS 2‐3 for remaining swivel wheel attachment.
5.Press the snap buttons and slide the swivel wheel attachments onto the front legs of the walker. Ensure that the snap button of each leg fully protrudes through the desired
adjustment hole and legs are adjusted so the walker sits level.
\
Hex
Nut 
Leg
Tube
Wheel
Swivel Caster
Housing
Adjustment
Holes
Leg Extensions and | 6 | Part No 1118382 |
Wheeled Walker Accessories |
|
|
