Outline Diagram | NE - 2146/NE - 1846 | ||||
(3) | (4)(5) | (1) | Digital Display Window (see below) | ||
(2) | Power Level Indicator Display | ||||
(1) |
|
| |||
|
| (3) | Power Level Selector Buttons | ||
|
|
| (4) | Timer Dial | |
(2) |
|
| (5) | Start Button | |
|
| (6) | Door Handle | ||
(7) |
|
| (7) | Oven Lamp Cover | |
|
| (9) | (8) | Air Filter | |
|
| (9) | Splatter Shield (top of inner cavity) | ||
|
|
|
| A | |
(6) |
|
|
|
| |
|
|
|
| B | |
|
|
| A | ||
|
|
| B | ||
| (8) |
|
| : HIGH | |
|
|
|
| : MEDIUM | |
|
|
|
| : DEFROST | |
How to Operate NE - 2146/NE - 1846
Example: To cook food at MEDIUM power for 4 minutes
1
2
3
4
PAD | INSTRUCTION | DIGITAL DISPLAY WINDOW |
|
|
|
Open the door and put the food in the oven.
☛ The oven lamp will turn on. “0” and Power Level Indicator 
will appear.
Note: While “0” appears, operation is available. One minute after the door is closed, “0” will disappear.
Press the desired Power Level Selector Button, if other than (HIGH).
Set heating time.
☛ The heating time will appear in the digital display while turning the Timer Dial.
Note: up to 25 min. on 
, 30 min. on 
or
Press Start Button.
☛ The oven lamp will turn on and heating will start. Power Level Indicator will start to blink, and heating time will count down.
•When all time expires, beep tone will sound and heating will stop. The oven lamp will turn off. “0” will blink until the door is opened. One minute later, cooling fan will stop.
•Open the door and take the food out. The oven lamp will turn on. Digital Display Window will show “0” and Power Level Indicator 
•Close the door. The oven lamp will turn off. One minute later, Digital Display Window will go blank.
•When you press the Start Button with door open, “0” will appear in the display in all cases.
•Even after setting the heating time you can still change the power level.
•If you wish to change the heating time during heating, simply adjust the timer to desired minutes and seconds.
- 7 -
