How to Operate NE - 2156/NE - 1856/NE - 1456
B. PROGRAMMED HEATING
◆In Program Unlock Mode:
Example: To select Number/Memory pad “3” at A side in which your desired heating program (at HIGH power for 3 min., single stage heating) is set
| PAD | INSTRUCTION | DIGITAL DISPLAY WINDOW |
1 |
| Open the door and put the food in the oven. |
|
|
| ☛ The oven lamp will turn on and “0” will appear. |
|
|
| Note: While “0” appears, operation is available. One minute after the door |
|
|
| is closed, “0” will disappear. |
|
2 | 3 | Press the desired Number/Memory pad “3”. | PROG |
|
| ||
| ☛ The currently programmed information will be indicated. | 1 | |
|
|
| |
3 |
| Press Start pad. | PROG |
|
| ☛ The oven lamp will turn on and heating will start. The heating time will | 1 |
|
| count down. | |
|
|
| |
• | When all time expires, beep tone will sound and heating will stop. The oven lamp will |
| |
| turn off. “0” will blink until the door is opened. One minute later, cooling fan will stop. |
| |
• | Open the door and take the food out. The oven lamp will turn on. |
| |
• | Close the door. The oven lamp will turn off. One minute later, Digital Display Window will |
| |
| go blank. |
|
|
Note:
•When you want to select the number at B side, press Shift (A/B) pad before pressing the desired Number/Memory pad.
◆In Program Lock Mode:
Just press the desired Number/Memory pad. Heating will automatically start without pressing Start pad.
◆For Double (or Treble) Quantity heating:
Press Double x 2 (or Treble x 3 ) Quantity pad before pressing the desired Number/Memory pad.
C. PROGRAMMING NUMBER/MEMORY PADS –– single stage heating ––
THE OVEN CAN NOT BE PROGRAMMED WHEN PROGRAM LOCK IS ACTIVATED! (see page
DO NOT OPEN THE DOOR WHILE PROGRAMMING!
Example: To program cooking at DEFROST power for 1 minute into Number/Memory pad “5”
1
2
PAD | INSTRUCTION | DIGITAL DISPLAY WINDOW |
|
|
|
Keep the door closed.
☛Digital Display Window must be blank.
Press Program pad. | PROG |
☛“PROG” will start to blink.
- 11 -
