How to Operate NE - 2156/NE - 1856/NE - 1456
A. MANUAL HEATING –– 2 or 3 stages heating ––
Example: To cook food at HIGH power for 2 minutes and at DEFROST power for 1 minute
| PAD |
| INSTRUCTION | DIGITAL DISPLAY WINDOW | |
|
|
| Follow steps 1 to 3 on page 9. |
| |
|
|
|
| 1 | |
4 |
|
| Press Power Level Selector pad three times. |
| |
|
|
| ☛ The selected power level will be indicated and 2nd Stage Heating | 1 2 | |
|
|
| Indicator “2” will start to blink. | ||
|
|
|
| ||
5 | 0 | 0 | Press Number/Memory pads “1”, “0” and “0”. |
| |
1 | ☛ The set heating time will appear. | 1 2 | |||
|
|
| |||
|
|
| Note: up to 15 min. on HIGH or MEDIUM power, 30 min. on DEFROST | ||
|
|
|
| ||
6 |
|
| Press Start pad. |
| |
|
|
| ☛ The oven lamp will turn on. The total time for both stages will appear | 1 2 | |
|
|
| and start to count down. 1st Stage Heating Indicator “1” and Power |
| |
|
|
| Level Indicator for the first stage heating will start to blink. |
| |
|
|
|
| 1 2 | |
• After the first stage heating, beep tone will sound. 2nd Heating Stage Indicator “2” and |
| ||||
Power Level Indicator for the second stage heating will start to blink and the remaining | 2 | ||||
heating time will count down. | |||||
| |||||
• When all time expires, beep tone will sound and heating will stop. The oven lamp will |
| ||||
turn off. “0” will blink until the door is opened. One minute later, cooling fan will stop. |
| ||||
• Open the door and take the food out. The oven lamp will turn on. Digital Display Window |
| ||||
will show the originally set time and power. |
| ||||
• Close the door. The oven lamp will turn off. One minute later, Digital Display Window will | 1 2 | ||||
go blank. |
|
| |||
|
|
| |||
Note: For 3 stages heating, select a power level once again after step 5 and set a heating time.
SPECIAL NOTE: For both single and 2 stages heating
1.While heating, one touch on Stop/Reset pad stops the operation. You can restart it by pressing Start pad or a second touch on Stop/Reset pad will cancel the selected program.
2.While not heating, one touch on Stop/Reset pad cancels the selected program.
Repeat Feature
•You can repeat the last manually selected heating time by pressing the Start pad , if the oven is used within 1 minute.
•After 1 minute of
- 10 -
