Panasonic NE-1846, NE-1856, NE-2146, NE-2156 Program List, Cycle Counter, Do not Close the Door

How to Operate NE - 2156/NE - 1856/NE - 1456

◆For selecting length of tone “short beeps for 60 seconds”:

Example: To select short beeps for 60 seconds

5

6

PAD	INSTRUCTION	DIGITAL DISPLAY WINDOW
	Follow step 1-4 on page 14.	PROG
	DO NOT CLOSE THE DOOR!	1
0	Within three seconds after pressing Prog pad at step 4, press	PROG
	Number/Memory pad “0” once.	2
	☛ “PROG” will start to blink and 2nd Stage Heating Indicator “2” (the
	length of beep tone “short beeps for 60 seconds”) will be indicated.
	Press Prog pad.	PROG
	☛ “PROG” will stop blinking. This means that you have completed	2
	programming.
	Three seconds later, “0” will appear.

• Close the door. One minute later, Digital Display Window will go blank.

G. PROGRAM LIST

1

2

PAD INSTRUCTION DIGITAL DISPLAY WINDOW

Open the door and leave it open.

☛ The oven lamp will turn on and “0” will appear.

+	While pressing Stop/Reset pad, press Start pad.	e.g.
	☛ All currently programmed information (the program set into each	PROG
	Number/Memory pad (A/B sides), Beep Tone, and Program Lock	1
	information) will continuously appear.
		PROG

1

PROG

2

PROG

H. CYCLE COUNTER

◆To Read The Number of Times Each Memory Pad Has Been Used:

Example: To read times of Number/Memory pad “3” at A side (6666 times used)

	PAD	INSTRUCTION	DIGITAL DISPLAY WINDOW
1		Open the door and leave it open.

☛ The oven lamp will turn on and “0” will appear.

2		3	While pressing Stop/Reset pad, press Number/Memory pad “3”.	e.g.
	+
			☛ The times that the pressed Number/Memory pad has been used will
			appear.

Note:

•When you want to read the times of each pad at B side, press Shift (A/B) pad while the display is still showing the number of cycles in step 2.

- 15 -