4 INSTALLATION
4 Installation
WARNINGS
Check all parts for shipping damage. In case of damage, DO NOT use. Contact the carrier for further instruction.
The installation area MUST be able to support the 66 pounds per square inch (45 n/cm²) load capacity of the tub. Otherwise, injury or damage might occur.
Access for servicing the tub MUST be provided. Install the tub in a location that will permit access to the service panels, plumbing and electrical hookup.
CAUTIONS
DO NOT lift the tub by the plumbing.
DO NOT modify the tub in any way. Modifications to the system or any component may cause the system to malfunction and will void the warranty.
4.1Preparing the Work Area
Access for servicing the tub MUST be provided.
Follow the recommended floor plan when installing the tub. Refer to Minimum Floor Space and Clearance Requirements on page 13.
1.Carefully remove the tub from the carton and inspect for shipping damage. If damage is found, contact the carrier.
2.Remove the tub from the shipping pallet by removing the screws from the leg mounting pads.
Invacare® TheraPure™Supine Whirlpool Tubs | 14 | Part No. 1167456 |
