SEAT AND BACK
SECTION 5 | SEAT AND BACK |
|
|
INSTALLING (FIGURE 2)
1.Move armrests out of the way by squeezing the armrest release lever and lifting.
2.Place seat in desired direction (DETAIL "A" of FIGURE 2).
3.Push seat down until it locks onto Rehab Shower Commode chair frame.
USING SEAT COVER (FIGURE 3)
Invacare provides a cover for the seat hole opening to be used if desired during shower use. Refer to FIGURE 3.
Seat Cover
Seat
FIGURE 3 - USING THE SEAT COVER
REMOVING/INSTALLING SEAT POSITIONING STRAP (FIGURE 4)
REMOVING
1.Remove the seat. Refer to REMOV-
ING/INSTALLING PADDED SEAT in section of this manual.
2.Move the swing back arm out of the way. Refer to POSITIONING
3.Remove the respective mounting screw and washer that secures each half of the seat positioning strap to the seat frame.
INSTALLING
1.Position the two (2) NEW seat positioning strap halves on the seat frame.
Seat Positioning
Strap
Washer
Mounting Screw
Frame
FIGURE 4 - REMOVING/INSTALLING
SEAT POSITIONING STRAP
2.Reinstall the two (2) mounting
screws and locknuts to secure the two (2) halves of the seat positioning straps to the seat frame.
3.Reinstall the seat. Refer to REMOVING/INSTALLING PADDED SEAT in section of this manual.
Rehab Shower Commode Chair | 20 | Part No. 1118394 |
