Invacare 6795 USING/ADJUSTING the Wheel Locks, Section Wheel Locks, Using the Wheel Locks Figure

WHEEL LOCKS

SECTION 11 WHEEL LOCKS

Section 11 - Wheel Locks - includes the following:

Using/Adjusting the Wheel Locks

WARNING

After ANY adjustments, repair or service and BEFORE use, make sure all attaching hardware is tightened securely - otherwise injury or damage may result.

If wheel locks do not hold the occupied Rehab Shower Commode chair in place contact a qualified technician - otherwise injury or damage may occur.

USING/ADJUSTING THE WHEEL LOCKS

USING THE WHEEL LOCKS (FIGURE 1)

WARNING

DO NOT attempt to stop a moving Rehab Shower Commode chair with the wheel locks. WHEEL LOCKS ARE NOT BRAKES - otherwise injury or damage may occur.

Keep hands and fingers clear of moving parts to avoid injury.

Wheel locks are standard on ALL Rehab Shower Commodes chairs with 24-inch rear wheels and 5-inch casters (on model nos. 6795 and 6895). These locks are provided to prevent the rear wheels from turning.

NOTE: Position Rehab Shower Commode chair on a flat, level surface to perform this procedure.

1.Ensure the Rehab Shower Commode chair is not moving before engaging the wheel locks.

2.To engage wheel locks, push the wheel lock handle forward to the LOCKED position (DETAIL "A" of FIGURE 1).

3.Disengage the wheel locks by reversing STEP 2 (DETAIL "B" of FIGURE 1).

DETAIL "A" - ENGAGED		DETAIL "B" - DISENGAGED
	Wheel Lock	Wheel Lock
Wheel Lock		Handle
	Handle	Wheel Lock

FIGURE 1 - USING WHEEL LOCKS

Rehab Shower Commode Chair 30 Part No. 1118394