WHEEL LOCKS

SECTION 11

ADJUSTING THE WHEEL LOCKS (FIGURE 2)

1.Loosen the two (2) socket screws that secure the wheel lock assembly to the Rehab Shower Commode chair frame.

NOTE: Any wheel lock adjustment should embed the wheel lock shoe at least 3/16-inch into the tire when engaged.

2.Adjust the position of wheel lock until the 3/16-inch measurement is obtained for correct wheel lock adjustment (FIGURE 2).

3.Securely tighten the two (2) socket screws.

4.Engage the wheel lock and push against the Rehab Shower Commode chair and determine if the wheel lock engages the wheel lock shoe enough to hold the Rehab Shower Commode chair.

5.Repeat the above sections until the wheel lock holds the Rehab Shower Commode chair.

6.Repeat section for opposite wheel lock

WHEEL LOCKS

Wheel Lock Handle

Wheel lock shoe

embedded into rear wheel tire at least 3/16-inch

FIGURE 2 - ADJUSTING WHEEL LOCK

Part No. 1118394

31

Rehab Shower Commode Chair

Page 31
Image 31
Invacare 6895, 6795, 6891 manual Wheel Locks Section Adjusting the Wheel Locks Figure, Adjusting Wheel Lock