Installing Front Riggings on the At’m
Assembly, Installation and Operating Instructions
Kit Numbers: 9153644014, 9153644018
SAVE THESE INSTRUCTIONS
NOTE: Check all parts for shipping damage. In case of damage, DO NOT use. Contact Carrier/Invacare for further instructions.
Safety Summary
To ensure the safe and proper installation and use of the front riggings on the At’m, these instructions MUST be followed:
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result.
Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories. Accessories designed by other manufacturers have not been tested by Invacare and are not recommended for use with Invacare products.
Description of the Kit
Kit Numbers 9153644014 and 9153644018 for Red or Blue At’m Front Riggings contain:
PART NUMBER | DESCRIPTION | QUANTITY |
|
|
|
1132651 | Right Legrest Support Assembly | 1 |
1132652 | Left Legrest Support Assembly | 1 |
1133151 | Mounting Hardware Assembly | 1 |
1134702 | 70° Complete Right Footrest Assembly | 1 |
1134703 | 70° Complete Left Footrest Assembly | 1 |
|
|
|
Installing Front Rigging Support Brackets
NOTE: For this procedure, refer to FIGURE 1.
NOTE: Perform the following steps one (1) side at a time.
1.Remove the plug button from the seat frame tube.
2.Note the orientation of the hardware that connects front seat support tube to the seat frame tube.
3.Remove the mounting screw, coved washers, spacers, washers and locknut securing front seat support tube to the seat frame tube. DO NOT discard.
For more information regarding Invacare products, parts, and services,
please visit www.invacare.com
Part No 1130250 | 1 | Installing Front Riggings on the At’m |
