Manuals / Brands / Personal Care / Mobility Aid / Invacare / Personal Care / Mobility Aid

Invacare 9758, 9859 CHANGING SEAT-TO-FLOOR HEIGHT- TRACER EX ONLY (FIGURE 1)

1 28

Download 28 pages, 527.46 Kb

22

SEAT-TO-FLOOR HEIGHTSPROCEDURE 6

D

E

A

L

E

R

A

D

J

U

S

T

M

E

N

T

S

This Procedure Includes the Following:

Changing Seat-To-Floor Height-Tracer EX Only

1. Remove the rear wheels from the wheelchair. Refer

to REMOVING/INSTALLING THE REAR WHEELS

in PROCEDURE 4 of this manual.

2. Remove the front casters from the wheelchair. Re-

fer to INSTALLING/REPLACING SIX OR EIGHT

INCH FRONT CASTERS & FORKS in PROCE-

DURE 5 of this manual.

3. Refer to the charts of front caster/fork and rear wheel

sizes, to determine mounting positions for obtain-

able seat-to-floor heights in FIGURE 1.

4. Reinstall the front casters onto the wheelchair. Refer

to INSTALLING/REPLACING SIX OR EIGHT INCH

FRONT CASTERS & FORKS in PROCEDURE 5

of this manual.

5. Reinstall the rear wheels onto the wheelchair. Refer

to REMOVING/INSTALLING THE REAR WHEELS

in PROCEDURE 4 of this manual.

6. Adjust anti-tippers as necessary. Refer to ADJUSTIING

THE ANTI-TIPPERS in PROCEDURE 7 of this manual.

WARNING

When changing the seat-to-floor height you

must adjust the anti-tippers accordingly.

NOTE: Tracer IV, Tracer Transport and Invacare MG:

Seat to floor height not adjustable.

CHANGING SEAT-TO-FLOOR HEIGHT-TRACER EX ONLY (FIGURE 1)

TRACER EX FRAME

Seat-to-Floor

Height

(In Inches)

21

21

20

19

Front Caster

Size

8-inch

6-inch

6-inch

6-inch

Front Caster

Mounting

Position

N/A

Bottom

Middle

Top

Rear Wheel

Size

24-inch

24-inch

22-inch

20-inch

NOTE: 6-inch and 8-inch casters require different forks.

FIGURE 1 - CHANGING SEAT-TO-FLOOR HEIGHT - TRACER EX ONLY

8-INCH FORK

MOUNTING POSITION

6-INCH FORK

MOUNTING POSITIONS

Top

Middle

Bottom

NOTE: Invacare recommends that the following proce-

dure be performed by an authorized dealer or qualified

technician.

WARNING

After ANY adjustments, repair or service and BE-

FORE use, make sure all attaching hardware is

tightened securely - otherwise injury or damage

may result.

Contents

Main WARNING TABLE OF CONTENTS TABLE OF CONTENTS SPECIAL NOTES SAFETY SUMMARY SAFETY SUMMARY SAFETY SUMMARY SAFETY/HANDLING OF WHEELCHAIRS STABILITY AND BALANCE COPING WITH EVERYDAY OBSTACLES A NOTE TO WHEELCHAIR ASSISTANTS PERCENTAGE OF WEIGHT DISTRIBUTION FUNCTIONAL REACH FROM A WHEELCHAIR REACHING, LEANING AND BENDING - FORWARD REACHING, LEANING - BACKWARDS TIPPING Step Tube METHOD 1 - WHEELCHAIR WITH STEP TUBE METHOD 2 - WHEELCHAIR WITHOUT STEP TUBE TRANSFERRING TO AND FROM OTHER SEATS STAIRWAYS ESCALATORS? SORRY! FOLDING AND UNFOLDING THE WHEELCHAIR "HAMMOCK OR SLING SEAT" MODELS "HAMMOCK OR SLING SEAT" MODELS 12 P SPECIFICATIONS 13 SAFETY INSPECTION CHECK LIST A F Y SAFETY INSPECTION CHECKLIST TROUBLESHOOTING/MAINTENANCE MAINTENANCE M A E A C E SWINGAWAY FOOTREST HEIGHT ADJUSTMENT (FIGURE 2) SWINGAWAY FOOTREST ASSEMBLY INSTALLATION (FIGURE 1) HEEL LOOP REPLACEMENT (FIGURE 3) PROCEDURE 1 FRONT RIGGINGS ELEVATING LEGREST ASSEMBLY INSTALLATION (FIGURE 4) ADJUSTING THE ELEVATING LEGREST ASSEMBLY (FIGURE 5) FIGURE 3 - HEEL LOOP REPLACEMENT FIGURE 5 - ADJUSTING THE ELEVATING LEGREST ASSEMBLY FIGURE 4 - ELEVATING LEGREST INSTALLATION A R M S FIGURE 3 - USING OR REPLACING FLIP-BACK ARMREST USING OR REPLACING FLIP-BACK ARMREST (FIGURE 3) FIGURE 1 - REMOVING OR REPLACING STANDARD ARMREST REMOVING OR REPLACING STANDARD ARMREST (FIGURE 1) REPLACING THE BACK UPHOLSTERY (FIGURE 2) REPLACING THE SEAT UPHOLSTERY (FIGURE 3) ADJUSTING SEAT WIDTH FOLD DOWN BACK - TRACER TRANSPORT ONLY (FIGURE 1) Page REMOVING/INSTALLING THE REAR WHEELS (FIGURE 1) REPLACING REAR WHEEL HANDRIM (FIGURE 2) REPLACING/REPAIRING REAR WHEEL TIRE/TUBE INSTALLING/REPLACING SIX OR EIGHT-INCH FRONT CASTERS AND FORKS (FIGURE 1) ADJUSTING FORKS (FIGURE 1) REPLACING/REPAIRING FRONT CASTER TIRE/TUBE REPLACING FRONT CASTERS (FIGURE 2) SEAT-TO-FLOOR HEIGHTSPROCEDURE 6 CHANGING SEAT-TO-FLOOR HEIGHT- TRACER EX ONLY (FIGURE 1) NOTE: 6-inch and 8-inch casters require different forks. FIGURE 1 - CHANGING SEAT-TO-FLOOR HEIGHT - TRACER EX ONLY 8-INCH FORK MOUNTING POSITION 6-INCH FORK MOUNTING POSITIONS Top Middle Bottom INSTALLING/ADJUSTING THE ANTI-TIPPERS This Procedure Includes the Following: Installing/Adjusting Anti-Tippers Wheel Lock Adjustment FIGURE 1 - ANTI-TIPPER LENGTH Top Position Anti-tipper Length FIGURE 2 - INSTALLING THE ANTI-TIPPERS WHEEL LOCK ADJUSTMENT (FIGURE 4) ANTI-TIPPERS/WHEEL LOCKSPROCEDURE 7 PROCEDURE 8 OPTIONS INSTALLING THE AMPUTEE ATTACHMENT (FIGURE 1) FIGURE 1 - INSTALLING THE AMPUTEE ATTACHMENT FIGURE 2 - INSTALLING FIXED HEIGHT I.V. ROD INSTALLING THE CARRYING POCKET (FIGURE 3) INSTALLING FIXED HEIGHT I.V. ROD (FIGURE 2) INSTALLING THE SEAT POSITIONING STRAP (FIGURE 4) PROCEDURE 8 Seat Positioning Strap Upholstery Cane FIGURE 5 - INSTALLING/ADJUSTING THE FRONT ANTI-TIPPERS INSTALLING ADJUSTING FLOOR OPTIONS PROCEDURE 8 LIMITED WARRANTY