Transfer Bench
Assembly, Installation and Operating Instructions
Model Nos. 9871 (Vinyl), 9873 (Urethane Foam), 98070 (Composite)
SAVE THESE INSTRUCTIONS
NOTE: Check all parts for shipping damage. In case of damage, DO NOT use. Contact Carrier/Invacare for further instructions.
SAFETY SUMMARY
To ensure the safe and proper installation of the Transfer Bench, these instructions MUST be followed:
WARNING
DO NOT install this equipment without first reading and understanding this instruction sheet. If you are unable to understand the warnings, cautions or instructions, contact a healthcare professional, dealer or technical personnel, before attempting to install this equipment - otherwise, injury or damage may occur.
The transfer bench backrest and seat arm MUST be installed BEFORE using the transfer bench.
DO NOT submerge seat pads in water otherwise damage to seat pads may result.
Check rubber tips for rips, tears, cracks or wear. If any of these conditions exist, replace rubber tips immediately.
Users with limited physical capabilities should be supervised or assisted when using the transfer bench.
Use seat arm ONLY to assist in transfers. DO NOT attempt to use seat arm to assist in standing in tub as tipping of the transfer bench could result.
SPECIFIC WARNINGS
The weight limitation of transfer bench (Model Nos. 9871, 9873, and 98070) manufactured after November 1, 1999 is 300 lbs (136.1 kg).
The serial number (Date Code Decal), located on the underside of the seat, is a 5 (five) digit identification and traceability label detailing the date of manufacture, and arranged as follows:
XXXXX 1st digit signifies the last digit of the year.
XXXXX 2nd and 3rd digits signify the month.
XXXXX 4th and 5th digits signify the day.
Example: 91101 = November 1, 1999
For more information regarding Invacare products, parts, and services,
please visit www.invacare.com
Part No 1075940 | 1 | Transfer Bench |
