Invacare HF2PCM2KIT

SECTION 4—INSPECTION AND COMPRESSOR INTERFACE

Part No 1143247 19 Oxygen Conserving Cylinder

ii. Thread the end of the belt that has no buckle and

retaining loop through the two loops on the

cylinder bag. See Detail “B”.

NOTE: T he web mater ial on t he bel t shou ld be fa cing a way fro m the

cylinder bag.

7. Insert the retaining loop onto the belt.

8. Slide the belt through the buckle.

9. Adjust the belt to your waist size.

10. Secure the loose end of the belt with the retaining loop.

FIGURE 4.6 Changing the Carrying Position of the Cylinder

se t

ese

oops

or carry

ng t

HFII bottle in a vertical position

Use these loops for carrying the

HFII bottle in a horizontal position

VIEW OF CYLINDER

VERTICAL CARRYING

POSITION

Contents

Main DANGER NOTICE TABLE OF CONTENTS SPECIAL NOTES RECEIVING INSPECTION INTENDED USE SECTION 1GENERAL GUIDELINES Page Page SECTION 2FEATURES DANGER SECTION 3TYPICAL PRODUCT PARAMETERS SECTION 3TYPICAL PRODUCT PARAMETERS SECTION 4INSPECTION AND COMPRESSOR INTERFACE Cylinder Prefill Inspection The Hydrostatic Testing Date External Examination SECTION 4INSPECTION AND COMPRESSOR INTERFACE Oxygen Conserving Cylinder 12 Part No 1143247 FIGURE 4.1 External Examination Connecting/Disconnecting the Cylinder to/from the Compressor Connecting the Cylinder to the Compressor CAUTION Page SECTION 4INSPECTION AND COMPRESSOR INTERFACE FIGURE 4.3 Connecting the Cylinder to the Compressor NOTE: Cylinder bag, cylinder fillport cover and connector fillport cover are not shown for clarity. Disconnecting the Cylinder from the Compressor Page Changing the Carrying Position of the Cylinder Page Cleaning the Cylinder Bag SECTION 5OPERATING INSTRUCTIONS Page SECTION 6MAINTENANCE CAUTION SECTION 7CYLINDER FILL TIMES Troubleshooting Page LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY