Invacare IH6065 series SECTION 3ASSEMBLY

SECTION 3—ASSEMBLY
Invacare Mobile Recliners 12 Part No. 1141494
SECTION 3—ASSEMBLY
 WARNING
After ANY adjustments, repair or service and before use, make sure that all attach-
ing hardware is tightened securely - otherwise injury or damage may result.
Assembling the Recliner
 WARNING
Tighten mounting screws securely. Failure to do so may result in bodily injury or
damage to the recliner.
Assembling Models IH6074A and IH6065 series
NOTE:Forthisprocedure,refertoFIGURE 3.1onpage 13.
1. Removebackframewithbackcushionfromitscarton.
2. Locktherearcasters.Workfromtherearofthereclinerbase.
NOTE:Ensurethatfootrestisinclosedpositionbeforeinstallingthebackframewithcushion.
3. Liftthechairbackinanuprightpositionbehindtherearseatcrossbrace.
4. Slidethebacktubesintotheopentubeendsoftherearseatcrossbrace.
5. Lifttheplasticskirtmountedonthebottomoftheseatandalignbehindtherearseat
framecrossbrace(Detail“A”).
6. Aligntheholesintheskirttotheholesinthechairbackbyfasteningthehardware.
7. Securelytightenthetwohexscrewstosecurethebackcushiontothebackframe.