SECTION 4—INSTALLATION

Securing the Tub

NOTE: For this procedure, refer to FIGURE 4.1 on page 17 and FIGURE 4.2.

1.Set the tub in place.

2.Mark location of anchor holes, using pre‐drilled holes in leg mounting pads as a template (Detail “A” of FIGURE 4.1).

3.Move tub away from mounting area.

WARNING

Protective eye wear MUST be worn when drilling to avoid possible eye injury.

4.Drill anchor holes in floor. Use a jack‐drill with a carbide bit for concrete floors or a wood bit for wood floors.

5.Reposition the tub in mounting area, aligning the holes in the leg mounting pads with the holes drilled in STEP 4.

WARNING

DO NOT adjust height of legs more than 1 inch (25.4 mm); leg will disassemble from leg mounting pad and serious injury may occur.

6.Level the tub by adjusting the telescopic legs either up or down, using a wrench, to achieve the desired height.

7.Check to make sure tub is level by placing a level on the front and sides of the tub (Detail “A” of FIGURE 4.2).

8.Repeat STEPS 6 and 7 until tub is level.

9.Secure legs to floor using fasteners appropriate for the floor material and in keeping with local codes (Detail “B” of FIGURE 4.2).

DETAIL “A” - LEVELING

DETAIL “B” - SECURING TUB

Level

Leveling

Side to Side

Level

Leveling

End to End

Leg

1-inch (25.4 mm)

Maximum Adjustment

Lag Bolt

Anchor

Lag Bolt

Leg Mounting

Pad

Anchor

FIGURE 4.2 Securing the Tub

Supine Bath Tub

18

Part No 1096926

Page 18
Image 18
Invacare IH6300ADH manual Securing the Tub

IH6300, IH6300ADH specifications

The Invacare IH6300ADH and IH6300 are advanced power wheelchairs designed to enhance mobility and independence for individuals with limited mobility. Featuring cutting-edge technology, these chairs are engineered to provide a safe, comfortable, and reliable mode of transportation for users.

One of the standout features of the Invacare IH6300 series is its robust and durable design. Built with a sturdy steel frame, these chairs can support a higher weight capacity, ensuring that they can accommodate a wide range of users. The ergonomic seating system provides optimal support and comfort during use, with adjustable seat depth and height options that cater to individual needs.

The IH6300ADH model takes comfort a step further with its enhanced cushioning and sophisticated suspension system, which absorbs shocks from uneven surfaces, allowing for a smoother ride. This is particularly beneficial for users who may travel over varied terrains or who may spend extended periods in their wheelchair.

Power and maneuverability are also key aspects of the Invacare IH6300 series. Both models come equipped with powerful motors that allow for swift movement and the ability to navigate inclines and tight spaces with ease. The intuitive joystick control enables users to operate the wheelchair effortlessly, offering precision in direction and speed.

Safety is paramount in the design of the IH6300 series. These wheelchairs feature intelligent braking systems that halt the chair when the joystick is released, preventing unintended movement. Additionally, the chairs are designed with anti-tip technology to enhance stability and prevent accidental falls.

The Invacare IH6300 series also boasts impressive battery life and efficiency, providing users with the freedom to travel longer distances without frequent recharging. The batteries are easily accessible for maintenance or replacement, ensuring ongoing reliability.

In summary, the Invacare IH6300ADH and IH6300 power wheelchairs stand out due to their exceptional build quality, user-friendly controls, and comprehensive safety features. They are ideal for individuals seeking mobility solutions that prioritize comfort, durability, and independence. With a range of options tailored to meet diverse user needs, the Invacare IH6300 series continues to be a leading choice in the realm of powered mobility devices.