Invacare IH6300ADH manual Plumbing Hook-Up, Install the plumbing hook‐ups per Figure

SECTION 4—INSTALLATION

Plumbing Hook-Up

WARNING

Be certain ALL plumbing work is performed by a qualified plumber and is in compliance with local codes.

NOTE: For this procedure, refer to Refer to FIGURE 4.5.

NOTE: For installation details refer to Plumbing Installation on page 23.

CAUTION

The 2 inch PVC stub MUST be recessed into the floor to make the elbow flush with the floor. For Model IH6300ADH, this will allow smooth up and down movement of the hose. Otherwise, drain tubing and fittings could be crushed at low point of operation.

1. Install the plumbing hook‐ups per FIGURE 4.5.

DETAIL “A” - HOOK UP LOCATIONS
3.5 in
(89 mm)	6.5 in	10.0 in
(165 mm)		(254 mm)
5.5 in
(140 mm)	Hot
Cold

DETAIL “B” - DRAIN AND ROUGH-IN LOCATIONS

3/4 in. Ball Valve	MUST be a
				Drain			Wall
	minimum of 6 in					36 in.
	above the floor
			Centerline of Tub			(915 mm)
				6 in.
				(152 mm)
			Tub
					Back of Tub
		Front of Tub					Elbow
		2 in. PVC stub
							Drain

FIGURE 4.5 Plumbing Hook-Up

Supine Bath Tub 22 Part No 1096926