SECTION 5—MAINTENANCE

Calibrating the Disinfectant Flowmeter

WARNING

DO NOT use this product or any available optional equipment without first completely reading and understanding these instructions and any additional instructional material such as owner’s manuals, service manuals or instruction sheets supplied with this product or optional equipment. If you are unable to understand the warnings, cautions or instructions, contact a healthcare professional, dealer or technical personnel before attempting to use this equipment - otherwise, injury or damage may occur.

The disinfectant dispensing system has been factory tested and calibrated for use with Invacare disinfectant. The use of any disinfectant with a dilution ratio (½ oz. per gallon) or viscosity level different than that of Invacare disinfectant will result in an improper mixture of disinfectant and water. This may cause your system to be improperly disinfected - or in some instances, not disinfected at all. If using any disinfectant with a dilution ratio or viscosity level different than that of Invacare disinfectant or if switching from one type of disinfectant to another type, the disinfectant flowmeter MUST be calibrated using this procedure before disinfecting the tub.

This procedure should only be attempted by qualified maintenance personnel. Failure to heed these precautions could result in injury to the tub operator or resident.

ALWAYS wear rubber gloves, an apron and face shield protection during disinfecting, cleaning and rinsing procedures. In case of eye or skin contact, follow procedures on disinfectant container.

NOTE: For this procedure, refer to FIGURE 5.2 on page 29.

NOTE: Equipment needed:

•Bucket or Pail, at least 1 Gallon

•Graduated plastic bottle, at least 16 ounces

•Felt Tip Pen

1.Open the whirlpool aerator by rotating two turns counterclockwise.

2.If the tub is equipped with a disinfectant wand, hold the wand over the interior of the tub.

3.Pour exactly one gallon of water into the bucket/pail.

4.Mark the bucket/pail at the gallon level using the felt tip pen.

5.Empty the bucket/pail.

6.Pour a whole number of ounces of disinfectant into the graduated plastic bottle.

NOTE: For example, pour 2 or 3 ounces, but not 2½ ounces, otherwise the results will be skewed.

NOTE: DO NOT use water instead of disinfectant. This would cause a false reading.

7.Note the number of ounces in the graduated plastic bottle.

8.Open the service access cabinet door.

9.Insert the disinfectant draw tube into the graduated plastic bottle.

10.Turn the black knob on the flow meter valve five turns counterclockwise to open the metering valve.

11.Close all jets by pushing the center of each jet in or turning the center of the jet clockwise.

12.Close the whirlpool inlet by pulling the inlet plug out.

13.Turn the disinfectant valve to the on position.

NOTE: Liquid will be heard filling the interior plumbing of the tub. 14. Note the position of the floating ball in the flow meter.

Supine Bath Tub

28

Part No 1096926

Page 27 Page 29
Page 28
Image 28
Invacare IH6300ADH manual Calibrating the Disinfectant Flowmeter
Page 27 Page 29

IH6300, IH6300ADH specifications

The Invacare IH6300ADH and IH6300 are advanced power wheelchairs designed to enhance mobility and independence for individuals with limited mobility. Featuring cutting-edge technology, these chairs are engineered to provide a safe, comfortable, and reliable mode of transportation for users.

One of the standout features of the Invacare IH6300 series is its robust and durable design. Built with a sturdy steel frame, these chairs can support a higher weight capacity, ensuring that they can accommodate a wide range of users. The ergonomic seating system provides optimal support and comfort during use, with adjustable seat depth and height options that cater to individual needs.

The IH6300ADH model takes comfort a step further with its enhanced cushioning and sophisticated suspension system, which absorbs shocks from uneven surfaces, allowing for a smoother ride. This is particularly beneficial for users who may travel over varied terrains or who may spend extended periods in their wheelchair.

Power and maneuverability are also key aspects of the Invacare IH6300 series. Both models come equipped with powerful motors that allow for swift movement and the ability to navigate inclines and tight spaces with ease. The intuitive joystick control enables users to operate the wheelchair effortlessly, offering precision in direction and speed.

Safety is paramount in the design of the IH6300 series. These wheelchairs feature intelligent braking systems that halt the chair when the joystick is released, preventing unintended movement. Additionally, the chairs are designed with anti-tip technology to enhance stability and prevent accidental falls.

The Invacare IH6300 series also boasts impressive battery life and efficiency, providing users with the freedom to travel longer distances without frequent recharging. The batteries are easily accessible for maintenance or replacement, ensuring ongoing reliability.

In summary, the Invacare IH6300ADH and IH6300 power wheelchairs stand out due to their exceptional build quality, user-friendly controls, and comprehensive safety features. They are ideal for individuals seeking mobility solutions that prioritize comfort, durability, and independence. With a range of options tailored to meet diverse user needs, the Invacare IH6300 series continues to be a leading choice in the realm of powered mobility devices.
Top Page Image Contents