SECTION
SECTION 3—SHIPPING AND HANDLING
NOTE: For this procedure, refer to FIGURE 3.1 on page 13.
Before you install and operate the concentrator, please refer to Platinum Series Ownerʹs Manual.
The Platinum concentrator should ALWAYS be kept in the upright position to prevent cabinet damage while being transported. The shipping container has been designed to assure maximum protection of the concentrator.
If the concentrator is to be reshipped by common carrier, it should be packed in a new carton. Additional cartons are available from Invacare.
The air compressor suspension system has been engineered to withstand severe motion and orientation.
Unpacking
1.Check for any obvious damage to the carton or its contents. If damage is evident, notify the carrier, or Invacare.
2.Remove all loose packing from the carton.
3.Carefully remove all the components from the carton.
NOTE: Retain carton and packing materials for storage of the Platinum.
Inspection
1.Examine exterior of the oxygen concentrator for nicks, dents, scratches or other damages. Inspect all components.
Storage
1.Store the repackaged oxygen concentrator in a dry area.
2.DO NOT place other objects on top of the repackaged concentrator.
Platinum™ | 12 | Part No 1134866 |
