ARMS

SECTION 4

Section 4 - Arms includes the following:

Using Flip Back Armrest

USING FLIP-BACK ARMREST (FIGURE 1)

WARNING

DO NOT operate flip-back armrest when wheelchair is folded - otherwise injury or damage may result.

Ensure armrest is securely locked into arm socket and armrest release button locks into place BEFORE using.

ARMS

1.Push down on front of armrest to ensure it is fully seated in front socket.

NOTE: This step is needed to prevent the release button from hanging up on the socket.

2.Press in armrest release button located on armrest front tube.

3.Rotate front of armrest UP and OUT of arm socket.

NOTE: Armrest can rotate back approxi- mately 90°.

4.To prepare armrest for use, rotate armrest downward, making sure front tube of armrest inserts into arm socket.

Armrest Release

Button

Armrest Front

Tube

Arm Socket

Armrest Rear

Tube

FIGURE 1 - USING FLIP-BACK ARMREST

5.Push armrest down until release button snaps into arm socket.

6.Ensure armrest is securely locked into arm socket and armrest release button locks into place BEFORE using.

Part No. 1119240

17

INVACARE MX

Page 17
Image 17
Invacare MX manual Using FLIP-BACK Armrest Figure, Arms Section