FRONT CASTERS | SECTION 7 | |
|
|
|
REPLACING FRONT CASTERS (FIGURE 2)
WARNING
Make sure both front casters are the same size and are installed into the same respective mounting hole BEFORE using the wheelchair, otherwise injury may occur.
1.Remove the hex screw, washers and locknut that secure the front caster to the fork. NOTE: Washers are only used with casters with precision bearings.
2.To reinstall the new front caster onto the fork, reverse STEP 1.
Fork | Locknut |
Hex Screw |
|
Washer (if applicable)
Front Caster
Washer (if applicable)
FIGURE 2 - REPLACING FRONT CASTERS
FRONT CASTERS
Part No. 1119240 | 21 | INVACARE MX |
