Replacing Back Upholstery Figure, Seat Backand | Invacare MX

SEAT BACKAND

SECTION 5		SEAT AND BACK

Section 5 - Seat and Back includes the following:

Replacing Back Upholstery

Replacing Seat Upholstery

REPLACING BACK UPHOLSTERY (FIGURE 1)

1.Remove the eight (8) phillips screws and eight (8) washers that secure the existing back upholstery to the back canes.

2.Remove existing back upholstery from the back canes.

3.Securely tighten the new back upholstery to the back canes with the phillips screws and washers.

Back Canes

Back Upholstery

Washers

Phillips	Washers
Screws

FIGURE 1 - REPLACING BACK UPHOLSTERY

REPLACING SEAT UPHOLSTERY (FIGURE 2)

1.Remove the eight (8) phillips screws and eight (8) washers that secure the existing seat upholstery to the crossbraces.

2.Remove the EXISTING seat upholstery from the crossbraces.

3.If used, ensure position of seat positioning strap. Refer to INSTALLING THE SEAT POSITIONING STRAP in SECTION 10 of this manual.

4.Install NEW seat upholstery by reversing STEPS 1-2.

Phillips Screws

Seat Upholstery

FIGURE 2 - REPLACING SEAT UPHOLSTERY

INVACARE MX

18

Part No. 1119240

Image 18

Invacare MX manual Replacing Back Upholstery Figure, Replacing Seat Upholstery Figure, Seat Backand, Section Seat and Back

Contents

InvacareR MX Invacare MX Table of Contents Special Notes Special Notes Label Locations Label Locations Stability General GuidelinesSection General Guidelines Operating Information Weight TrainingWeight Limitation General Guidelines Section SAFETY/HANDLING of Wheelchairs Stability and BalanceCoping with Everyday Obstacles Percentage of Weight Distribution Reaching, Leaning and Bending Forward ESCALATORS? Sorry TippingGuidelines STAIRWAYS? Sorry Transferring to and from Other Seats Unfolding and Folding the Wheelchair Folding Unfolding Folding Safety Inspection Checklist Safety Inspection SectionSafety Inspection Maintenance Safety Precautions Section Safety Inspection Installing INSTALLING/REMOVING the Front Riggings FigureFootrest Height Adjustment Figure Removing RAISING/LOWERING the Elevating Legrest Assembly Figure Section Front Riggings Using FLIP-BACK Armrest Figure Arms SectionArms Seat Backand Replacing Back Upholstery FigureReplacing Seat Upholstery Figure Section Seat and Back REMOVING/INSTALLING the Rear Wheels Figure Rear Wheels SectionRear Wheels Adjusting Forks Figure CastersfrontSection Front Casters Replacing Front Casters Figure Front Casters SectionFront Casters Section Wheel Locks Wheel Lock Adjustment FigureLockswheel Wheel Locks are not Brakes Inch Front Casters Changing SEAT-TO-FLOOR Height FigureSEAT-TO-FLOOR Height Section Rear Wheel Mounting Fork Positions Mounting Positions Installing Seat Positioning Strap Figure OptionsSection Options Invacare MX Invacare MX Warranty Warranty Made in Mexico Canada