INSTALLING/REMOVING THE CONTOUR U SEATING SYSTEM BACK (FIGURE 4)
Installing
1.Ensure that the twist release clamps are in the OPEN position as shown in DETAIL “A” of FIGURE 4.
2.Position the two (2) lower J brackets securely into the two (2) fixed release clamps as shown in FIGURE 4.
3.Position the upper two (2) J brackets against the back canes just below the two (2) twist release clamp.
4.Rotate the two (2) twist release clamps to the CLOSED position as shown in DETAIL “B” of FIGURE 4.
Removing
1.Rotate the two (2) twist release clamps to the OPEN position as shown in DETAIL “B” of FIGURE 4.
2.tilt the top of the ContourU back forward away from the back canes.
3.Puilling UP, remove the ContourU back from the back canes.
| DETAIL "A" |
|
| DETAIL "B" | |
Back Canes | J Bracket | ContourU | Back Canes | ContourU | |
Back | |||||
| Back |
| |||
|
|
|
|
Twist Release | Twist Release Clamps. | |
(CLOSED Position) | ||
Clamps. | ||
| ||
(OPEN Position) |
| |
| J Brackets |
Fixed Release
Clamp
Fixed Release Clamp
J Bracket
FIGURE 4 - INSTALLING/REMOVING THE CONTOUR U BACK
6
