Invacare PHWH93 manual Arms, Adjusting Armrests, Angle, Height

SECTION 4—ARMS

SECTION 4—ARMS

WARNING

After ANY adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result.

Before performing any maintenance, adjustment or service verify that On/Off switch on the joystick is in the Off position.

Adjusting Armrests

WARNING

Pinch point may occur when adjusting the arm angle position (Detail “A”).

Angle

NOTE: For this procedure, refer to Detail “A” of FIGURE 4.1.

1.Lift up the armrest.

2.Loosen the jam nut.

3.Adjust the socket screw up or down to the desired arm angle position.

4.	Tighten the jam nut.		DETAIL “A” - ANGLE
5.	To determine the same angle for the	Armrest	Adjustment
	opposite armrest, count the exposed		Screw
	threads after the jam nut has been
	tightened.
6.	Repeat STEPS 1‐4 for opposite armrest,
	if necessary.		Jam Nut

Height

NOTE: For this procedure, refer to Detail “B” of FIGURE 4.1.

1.Remove the socket screw that secures the armrest to the seat frame assembly.

2.Adjust the armrest to one of four positions.

3.Reinstall the socket screw that secures the armrest to the seat frame assembly and tighten securely.

DETAIL “B” - HEIGHT
Height Adjustment
Holes	Armrest

Seat Frame

Assembly

Lock Knob

FIGURE 4.1 Adjusting Armrests

Part No 1143195 15 Van Seat