SECTION
SECTION 5—SEAT
WARNING
After ANY adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustment or service verify that On/Off switch on the joystick is in the Off position.
Adjusting the Headrest
NOTE: For this procedure, refer to FIGURE 5.1.
1.To raise headrest, lift headrest Up to desired position.
NOTE: Headrest is locked in position when an audible “click” is heard.
2.To lower headrest, push release tab towards the inside of the wheelchair. Lower headrest to desired position.
Adjusting the Back Angle
NOTE: For this procedure, refer to FIGURE 5.2.
1.Lift up on the release handle and adjust seat to desired angle.
2.Let go of the release handle to lock the back in position.
Headrest
Release
Tab
Headrest Tube
FIGURE 5.1 Adjusting the Headrest
Release
Handle
FIGURE 5.2 Adjusting the Back Angle
Van Seat | 16 | Part No 1143195 |
