APPENDIX A

CONTROLLING ACTUATORS (SEAT CONTROLS) OR LIGHTS USING THE JOYSTICK

If your chair is fitted with Actuators (Seat Controls) or Lights they may be operated using the G80I’s joystick. To control actuators or lights using the joystick:

Ensure the chair is stationary.

Press the mode/speed selection button repeatedly until one of the non-driving mode symbols, shown below, appears on the 7 Segment Display.

Mode/Speed Selection

7 Segment Display

Actuator & Lighting

Non-Drive Mode Symbols

Tilt in

Back

Left Leg

Right

Seat

Lights

Space

Rest

Rest

Leg-Rest

Height

 

Move the joystick from left to right to select the symbol for the function that you wish to control.

If you have selected an Actuator (Seat Control) Mode move the joystick forward, beyond the point of half travel, to lift the actuator or pull back, beyond the point of half travel, to lower the actuator. Release the joystick to stop the actuator.

If you have selected Lighting Mode, momentarily push the joystick forwards, beyond the point of half travel, to toggle the Side Lights on or off or pull back, beyond the point half travel, to toggle the Hazard Lights on or off. Repeat the process to turn the relevant lighting off. Hazard operation will be indicated on the G80I by the flashing of the Left and Right Indicator Displays shown in the section below.

CONTROLLING LIGHTING FUNCTIONS USING THE KEYPAD

If lights are fitted to the wheelchair they may also be activated using the lighting controls on the G80I’s Keypad.

left Indicator and

Right Indicator and

Side Light Switch

Hazard Switch

Left Indicator

Right Indicator

Display

Display

Left and Right Indicators

A single short press (less than 1 second) of the Left or Right Indicator switch will toggle the Left or Right Indicators, respectively, on or off. The associated Indicator Display will flash to show when the indicators are activated.

Side Lights

A single long press (greater than 1 second) of the Side Light (or left indicator) Switch will toggle the Side Lights on and off. There is no Display feedback on the keypad when the side lights are active.

Hazard Lights

A single long press (greater than 1 second) of the Hazard (or right indicator) Switch will toggle the Hazard Lights on or off. Both Left and Right Indicator Displays will flash when the Hazard Lights are active.

11

Page 13
Image 13
Invacare Spectra Plus Appendix a, Controlling Lighting Functions Using the Keypad, Left and Right Indicators, Side Lights