Invacare Spectra Plus user manual Footrests, Adjustment, Lowest Part Footrest Must be AT Least

FOOTRESTS

REMOVAL - Standard

Release winged screw A and slide the complete assembly from the seat frame. Ensure the winged screw is fully tightened when the footrest assembly is replaced.

REMOVAL - Swing - Away

Release the locking lever, swing footrest to the side, or lift up and off. Do this before sitting in the chair.

CAUTION:: ItItisisrecommended thatt both footrests are firmly locked in place when

!platesIf the. Ifweightthe weightof theof bodythe bodyis placedis placedononthethefootfoot-plates,-plates,damagemayyoccur and the chair may tip forward.

the.seatedin the chair(particularlywheny whendrivingdrivingthe thechair)chair). NEVER. NEVERstandstandon theonfootthe-platesfoot.-

ADJUSTMENT

To extend the ffootrestlaterallly,release the winged screw A, pull the ffootrestt forward, re-tighten when tthe desired position is achieved.

It is not necessary to rrellease the grub
screw B. This should		remaiin
permanentlly iin position.
To adjust the footrest llengtth,, lloosen
the hex nut C on the exttensiion ttube,
use a twisting motion when slidiing tthe
telescopic tube in and outt.. Be surre to
re-tighten the nuts securely when tthe
desired heightt iis achieveded..
THE LOWEST PART OF THE
FOOTREST MUST BE AT LEAST
6cm ((2½”)•“) FROM THE GROUND
FOR CLEARANCE. .
	ELEVATING LEGRESTS
	To raise or lower, release the lock by moving
	the lever forward as shown.
	When lowering the legrest, support the
	weight of user’s leg then release the lock,
	keep it from dropping	too quickly. Keep in	LOCKING LEVER
	mind that the lowest part of the footplate must
	be 6cm (2”) from the ground.

19