Maximum Speed Indicator | Invacare Spectra Plus specification

Maximum Speed Indicator

This is a gauge that shows the maximum speed setting of the wheelchair. There are five speed settings: - step 1 is the lowest speed and step 5 is the highest speed

Mode Switch - Speed Settings

The mode switch is used to make the maximum speed changes and to change between wheelchair operation modes.

If the mode switch is operated whilst you are driving the maximum speed setting will be increased by one step. Each successive operation of the mode switch will increase the setting, when the setting is at 5 the next mode switch operation will put the setting to 1. The diagram below explains this action.

SPEED 1

SPEED 5

SPEED 2

SPEED 4

SPEED 3

Fig.. 1 Operation of Mode Switch Whilst Drivingi

Operating the mode switch will put the control system backintothedrivemode..

If the mode switch is operated when the joystick is centred,, tthe controll system operationti mode wiilll be changed. There are tthree modes - drive, speed adjustment and actuatorr adjustment.. TThe diagram below explains this action.

DRIVE

MODE

ACTUATOR

ADJUST

SPEED

ADJUST

Fig. 2 Operation of Mode Switch Whilst Joystick Centred

15

Image 17

Invacare Spectra Plus user manual Maximum Speed Indicator

Contents

Spectra Plus Contents Foreword Purpose of the Power ChairAdvisory Safety Notice Safety Precautions Getting Acquainted with Your NEW Power Chair Joystick Features Backrest Angle Adjustment Seat and Backrest AdjustmentSeat Depth Adjustment 35mm depth adjustment Armrest Adjustment MANUALALTILTT--IN--SPACE Tensiontensionadjustableadjustablebackrest Pilot Integral Handling and Operation Controllers Recommended Driving Position Dynamic DL Controller DX-REMG80IMASTER Remote Important Information for Your Safety IntroductionHandling and Transportation Driving the Wheelchair Safety and Misuse Warnings MaintenanceFault Diagnostics Left and Right Indicators Controlling Lighting Functions Using the KeypadAppendix a Side Lights Negotiating Kerbs PILOT+Negotiating GRADIENTS/SLOPES Controls Joystick Module Details Horn Switch Maximum Speed Indicator Speed Adjustment Mode DUAL/ATTENDANT Control Controller OptionsCircuit Breakers 30 AMP Chin Control Attendant Control Transfers Footrests AdjustmentLowest Part Footrest Must be AT Least For Clearance Elevating Legrests Levers Pointing Rearwards Pushing the Chair Freewheel Mode Operating the Chair Outdoors Kerb Climbing RE-ASSEMBLYGoing UP a Kerb Going Down a Kerb DIS-ASSEMBLY Detachable Motors Drive WHEEL-LOCKS Manual Brakes Drive Wheel Removal Occupant’s inertia seat belt Which also must be used Power chair was ttestted toLabelled „TIIEDOWNPOINTPOINT Diiagram Fig. No..2 shows Fig. No.3 Transportation Operation Removal Switch OFF the Controller Tray Assembly Fitting Operation Instructions Shown in Fig Lateral Support Fitting Instructions Mains Socket Charger Controller Front Charging BatteriesBatteries Pollution from improper disposal Battery Connections CHROME/PAINTWORK Keeping Your Chair in Good Condition Fault Finding Daily Weekly Monthly Yearly Spectra PlusTechnical Information Approved Accessories Available Models Covered Spectra Plus Spectra Plus