CONTROLLER OPTIONS
The optional Attendant, Chin and Centre are fitted with the PILOT+ Control System. The display function is the same for each joystick module.
DUAL/ATTENDANT CONTROL
CAUTION: ATTENDANT, Before switching from Occupant Control to Attendant control, it is of the utmost importance that the speed control is checked and a safe manageable speed is selected before activating the joystick.
Failure to do so may cause the chair to move uncontrollably, causing injury to the occupant or other people.
CHIN CONTROL
ATTENDANT CONTROL
CIRCUIT BREAKERS - 30 AMP
The circuit breakers are located at the front of the front battery box and at the front of the rear battery box between the two battery boxes. They are fitted to operate if a current overload should occur. If one of the breakers operate, it will ‘pop’ out. To
Under certain circumstances, particularly indoor use, care must be taken to ensure safe continual operation of the motor units. If an obstacle is encountered or, with slow manoeuvring of the castor wheels from the forward to rear position, continual full operation of the joystick control will result in motor overload and eventual failure.
To prevent this occurrence, increase the speed to maximum, control the manoeuvre by the joystick control, always move away from the obstacle, do not continue to drive against it.
17
