7.6Status display
The status display serves to display error messages. For error codes see chapter "Error Codes and Diagnostic Codes" on page 42.
7.7Activate/de-activate the immobiliser
Activate the immobiliser | Activate |
•Whilst the remote is switched on, press and hold the ON/OFF button (1) for 4 seconds. The remote will switch off immediately. After 4 seconds the battery charging display will illuminate briefly and the horn will be heard twice. The immobiliser is activated.
| Deactivate |
•Whilst the immobiliser is activated, switch on the remote using the ON/OFF button (1). The diodes of the battery charging display will illuminate briefly once from left to right. A slow countdown will then be displayed from right to left.
•Press the horn button (2) twice before the countdown is completed. You have about 10 seconds to do this. The immobiliser is de- activated.
35
