8 Installation Instructions
8.1.Choosing the Installation Location
•When installing, use the nearest power outlet. Make sure the power outlet is easy to reach so you can quickly disconnect your air conditioner in case of emergency.
•Ensure that the air conditioner is well supported, securely fastened, easily reachable and not obstructed.
•Avoid locations with: salty or sulphurous air, draughts, dampness and flammable gas.
•If you install the drainage system, be sure to channel the condensed water to a suitable location
•Covers, obstructions and unsteady support may cause excessive operating noise and vibration.
•The rear end of the air conditioner is splash proof. You need not shield or cover it.
8.2.Preparation for Installation
DIMENSION
•There should not be any obstacles surrounding the unit.
•Prepare an installation hole slightly bigger than the cabinet size.
•Left and right sides of the unit should be at least 15cm away from the wall
8.3.Installation Procedure
8.3.1.Installation Procedures
•Remove the screws from the rear cabinet.
•Slide the chassis out from the cabinet.
•Place cabinet into the installation hole.
10
