5
INSTALLATION INSTRUCTIONS

Unpack the Air Conditioner

Remove packaging materials
■Remove and properly dispose of packaging materials.
Remove tape and glue residue from surfaces before turning
on the air conditioner. Rub a small amount of liquid dish soap
over the adhesive with your fingers. Wipe with warm water
and dry.
■Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your air conditioner.

Install Portable Air Conditioner

Install Exhaust Hose and Adapter
1. Roll air conditioner to its selected location. See “Location
Requirements.”
2. Insert flexible exhaust hose into opening in back of air
conditioner.
3. Twist clockwise to lock hose into place.
4. Attach window exhaust adapter to the flexible exhaust hose.
Turn clockwise until securely locked into place.
Window Installation
Your window slider kit has been designed to fit most standard
vertical and horizontal window applications. However, it may be
necessary for you to modify some aspects of the installation
procedures for certain types of windows.
1. Open the window.
2. Place the window slider kit into the window, extending it to fit
the width of the window.
Vertical Slide Window
NOTE: For casement window installation, the window slider kit
may be installed vertically with the window slider kit opening at
the bottom.

Excessive Weight Hazard

Use two or more people to move and install

air conditioner.

WARNING

Failure to do so can result in back or other injury.

A.Flexible exhaust hose
B.Evaporator air intake
C.Power supply
D.Drain port
A.Flexible exhaust hose
B.Window exhaust adapter
B
A
C
D
B
A