9
ComfortMode™ Control
1. Press ComfortMode control. The temperature and fan speed
set automatically.
2. Press the up or down arrow button to increase or decrease
the set temperature 4ºF (2ºC).
3. Press FAN SPEED to alternate between High and Low
speeds each time Fan Speed is pressed.
RapidCool™ Mode
Used for fast cooling. Automatically sets fan speed to high and
temperature to 64°F (18ºC).
NOTE: ComfortMode control button does not operate in
RapidCool control mode.
1. Press RapidCool mode. The temperature will automatically
set to 64ºF (18ºC).
2. To turn RapidCool mode off, press either ComfortMode
control, COOLING, DRY, FAN, the power button or the plus or
minus buttons.
Fan Speed (in Cooling or Fan Only modes only)
1. Press FAN SPEED.
2. Choose Auto, High or Low.
Temperature
To raise the temperature:
Press the plus button to increase the temperature 2ºF (1ºC).
To lower the temperature:
Press the minus button to decrease the temperature 2ºF (1ºC).
Time of Day
1. Press and hold CLOCK. “12:00” will be displayed.
2. Press the plus or minus button to set the time.
Timer Delay
To set the Timer for a 1- to 24-hour delay until the air
conditioner turns off (the air conditioner must be On):
1. Press TIMER OFF. Timer “OFF 00:00” indicator light will flash.
2. Press the plus or minus button to change the delay time (1 to
24 hours).
3. Press TIMER OFF again. Timer “OFF 00:00” indicator light will
remain on.
To set the Timer to turn on the air conditioner, keeping
previous settings:
1. Turn off air conditioner.
2. Press TIMER ON. Timer “ON 12:00” indicator light will flash.
3. Press the plus or minus button to change the delay time (1 to
24 hours).
4. Press TIMER ON again. Timer “ON 12:00” indicator light will
remain on.
To set the Timer to turn on the air conditioner, changing
the previous settings:
1. Turn off air conditioner.
2. Adjust Mode to ComfortMode™ control, Cooling, Dry, Fan or
RapidCool™.
3. For Cooling:
■Adjust fan speed to High, Low or Auto.
■Adjust temperature between 64ºF (18ºC) and 90ºF (32ºC).
4. For Fan mode, adjust fan speed to High or Low.
5. For ComfortMode™ control and Dry modes, adjust
temperature up or down by 4ºF (2.2ºC)
NOTE: In Fan mode, temperature cannot be set.
6. Press TIMER ON. Timer “ON 12:00” indicator light will flash.
7. Press the plus or minus button to change delay time (1 to
24 hours).
8. Press TIMER ON again. Timer “ON 12:00” indicator light will
remain on.
To clear Timer delay program:
NOTE: Air conditioner can be eith er on or off.
Press and hold TIMER OFF for 3 seconds. Timer indicator light
will turn off.
To see or change the remaining time (in hours):
1. Press TIMER ON or TIMER OFF once after it has been
programmed.
2. While the display is showing the remaining time, you can
press the plus or minus button to increase or decrease the
time.
NOTE: Timer On and Timer Off can be set at the same time.