SECTION 6—FRONT RIGGINGS
SECTION 6—FRONT RIGGINGS
WARNING
After ANY adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustment or service verify that On/Off switch on the joystick is in the Off position.
Installing/Removing/Using the Footrest/Legrest
NOTE: For this procedure, refer to FIGURE 6.1.
NOTE: This procedure applies to the swingaway footrest and elevating legrest.
Installing
1.Turn the swingaway footrest assembly to the side (open footplate is perpendicular to wheelchair).
2.Install the hinge plates on the swingaway footrest assembly onto the hinge pins on the wheelchair frame.
3.Push the swingaway footrest assembly towards the inside of the wheelchair until it locks into place.
NOTE: The footplate will be on the inside of the wheelchair when locked in place.
4. Repeat this procedure for the other footrest assembly.
Footrest
Release Lever
Swingaway
Footrest
Assembly
Hinge 
Pins
Footplate
Hinge
Plates
FIGURE 6.1 Installing/Removing/Using the Footrest/Legrest
Part No. 1123839 | 33 |
