IOGear G-CS12, G-CS14 manual Operation, Manual Port Selection

Operation

6

ä

Operation

Controlling the PCs in your MiniViewTM configuration from a single console couldn’t be easier. Two port selection methods provide instant access to any attached PC:

Manual Port Selection

Hot Key Port Selection

Note: When powering-on, the MiniViewTM switches to port 1 by default. If the PC attached to port 1 is inactive, the monitor will be blank so it may appear as if the unit is not functioning. This is not the case. Simply use one of the port selection

methods described below to switch to the active PC on a different port.

Manual Port Selection

With manual port selection, you simply press the Port Selection button on the

side panel of the MiniViewTM to switch between computers. The selected LED on the top panel will light up to indicate which port is active.