Manuals / IOGear / Computer Equipment / Computer Drive

IOGear GCS632U Installation, Step, Repeat the above step for your second computer

Models: GCS632U

1 33

Download 33 pages 1.27 Kb

Page 12

4.Repeat the above step for your second computer.

Installation

Step. 2

3.Plug the USB, video, and speaker connectors of the attached KVM cables into their respective ports on the computers you are installing.

NOTE: The computer attached to the cable with one dot at its base is the Port 1 computer; the computer attached to the cable with two dots at its base is the Port 2 computer (see p. 10 for hotkey port selection).

4.Repeat the above step for your second computer.

5.Turn on the power to the computers and refer to Operations Instructions.

NOTE: The GCS632U’s Power On default is to link to the first computer you turn on.

9

Image 12

IOGear GCS632U installation manual Installation, Step, Repeat the above step for your second computer

Contents

2-Port KVM Switch with Built-in KVM Cables and Audio Support Installation Manual GCS632UMiniView Micro USB Plus 2005 IOGEAR. All Rights Reserved. PKG-M0089b Welcome Table of Contents Package Contents 1 Quick Start Guide 1 Warranty Registration CardThis package contains If any items are damaged or missing, please contact your dealerOverview the Mac or Sun keyboard as the console keyboard, or with a standard PC key- board. When use a PC keyboard, a special set of hot keys are designated to emulate the Mac and Sun special keys OverviewFeatures Requirements ConsoleComputers AudioIntroduction 1. Port LEDs Refer to Appendix for LED indications 2. KVM Cables3. Console Ports 4. Speaker Jack Installation StepInstallation Step4. Repeat the above step for your second computer 3Operation4 Hotkey OperationScroll Lock PC keyboardPort Switching Hotkey Setting Mode HSMOperation Operation Num LockMinus PC keyboardOperation 1. Press and hold Clear key for two secondsOperation Clear MinusMac keyboard Switching Ports Operation1. Invoke Hotkey Mode See page 2. Press and release the computer’s port number 1 or 3. Press EnterAlternate Hotkey Invocation Keys OperationAlternate Port Switching Keys Operation3. Press Enter The GCS632U’s factory default settings are as follows Restore DefaultsOperation 1. Invoke Hotkey Mode See Page 2. Press and release R keyMulti Platform Mac, Sun, Win and Multi Language Setup OperationOperation OperationKeyboard Platform Operation 1. Bring the KVM focus to the desired port2. Invoke Hotkey Mode See Page 3. Press and release the appropriate function key see tableUsing a PC keyboard to emulate a Sun Keyboard After completing a setting, you automatically exit Hotkey ModeOperation Using a PC keyboard to emulate a Mac Keyboard OperationList Hotkey Settings USB Reset3. Press F4 to ‘paste’ the KVM configuration on your text editor OperationAppendix LED Display Tableand is being accessed in Auto Scan Mode ActivitySpecification Technical Support Radio & TV Interference Statement Limited Warranty Contact info