Manuals / IOGear / Computer Equipment / Computer Drive

IOGear GCS632U installation manual Using a PC keyboard to emulate a Sun Keyboard, Operation

Models: GCS632U

1 33

Download 33 pages 1.27 Kb

Page 25

Image 25

Operation

After completing a setting, you automatically exit Hotkey Mode.

Using a PC keyboard to emulate a

Sun Keyboard

After you set up the appropriate Keyboard Platform (refer to Page16), you will be able to use a PC (101/104) key keyboard to emulate the functions of the Sun keyboard when the Control key [Ctrl] is used in conjunction with other keys.The corresponding functions are shown in the table to the right.

NOTE: When using [Ctrl] combinations, press and release the [Ctrl] key, then press and release the activation key.

Page 25

Image 25

IOGear GCS632U installation manual Using a PC keyboard to emulate a Sun Keyboard, Operation

Contents

Installation Manual GCS632U 2-Port KVM Switch with Built-in KVM Cables and Audio SupportMiniView Micro USB Plus 2005 IOGEAR. All Rights Reserved. PKG-M0089b Welcome Table of Contents 1 Quick Start Guide 1 Warranty Registration Card Package ContentsThis package contains If any items are damaged or missing, please contact your dealerOverview Overview the Mac or Sun keyboard as the console keyboard, or with a standard PC key- board. When use a PC keyboard, a special set of hot keys are designated to emulate the Mac and Sun special keysFeatures Console RequirementsComputers Audio1. Port LEDs Refer to Appendix for LED indications 2. KVM Cables Introduction3. Console Ports 4. Speaker Jack Step InstallationStep Installation4. Repeat the above step for your second computer Hotkey Operation 3Operation4Scroll Lock PC keyboardHotkey Setting Mode HSM Port SwitchingOperation Num Lock OperationMinus PC keyboard1. Press and hold Clear key for two seconds OperationClear Minus OperationMac keyboard Operation Switching Ports1. Invoke Hotkey Mode See page 2. Press and release the computer’s port number 1 or 3. Press EnterOperation Alternate Hotkey Invocation KeysOperation Alternate Port Switching KeysRestore Defaults 3. Press Enter The GCS632U’s factory default settings are as followsOperation 1. Invoke Hotkey Mode See Page 2. Press and release R keyOperation Multi Platform Mac, Sun, Win and Multi Language SetupOperation OperationKeyboard Platform 1. Bring the KVM focus to the desired port Operation2. Invoke Hotkey Mode See Page 3. Press and release the appropriate function key see tableAfter completing a setting, you automatically exit Hotkey Mode Using a PC keyboard to emulate a Sun KeyboardOperation Operation Using a PC keyboard to emulate a Mac KeyboardUSB Reset List Hotkey Settings3. Press F4 to ‘paste’ the KVM configuration on your text editor OperationLED Display Table Appendixand is being accessed in Auto Scan Mode ActivitySpecification Technical Support Radio & TV Interference Statement Limited Warranty Contact info