Manuals / IOGear / Computer Equipment / Computer Drive

IOGear GCS632U Operation, Invoke Hotkey Mode See Page 2. Press and release R key

Models: GCS632U

1 33

Download 33 pages 1.27 Kb

Page 21

Image 21

Operation

Restore Defaults

To restore the GCS632U to its factory default settings, do the following:

1.Invoke Hotkey Mode (See Page 11-13)

2.Press and release [R] key.

3.Press [Enter]

The GCS632U’s factory default settings are as follows:

Page 21

Image 21

IOGear GCS632U installation manual Operation, Invoke Hotkey Mode See Page 2. Press and release R key, Restore Defaults

Contents

2-Port KVM Switch with Built-in KVM Cables and Audio Support Installation Manual GCS632UMiniView Micro USB Plus 2005 IOGEAR. All Rights Reserved. PKG-M0089b Welcome Table of Contents 1 Quick Start Guide 1 Warranty Registration Card Package ContentsThis package contains If any items are damaged or missing, please contact your dealerOverview Overview the Mac or Sun keyboard as the console keyboard, or with a standard PC key- board. When use a PC keyboard, a special set of hot keys are designated to emulate the Mac and Sun special keysFeatures Console RequirementsComputers AudioIntroduction 1. Port LEDs Refer to Appendix for LED indications 2. KVM Cables3. Console Ports 4. Speaker Jack Step InstallationInstallation Step4. Repeat the above step for your second computer Hotkey Operation 3Operation4Scroll Lock PC keyboardPort Switching Hotkey Setting Mode HSMOperation Num Lock OperationMinus PC keyboard1. Press and hold Clear key for two seconds OperationOperation Clear MinusMac keyboard Operation Switching Ports1. Invoke Hotkey Mode See page 2. Press and release the computer’s port number 1 or 3. Press EnterOperation Alternate Hotkey Invocation KeysOperation Alternate Port Switching KeysRestore Defaults 3. Press Enter The GCS632U’s factory default settings are as followsOperation 1. Invoke Hotkey Mode See Page 2. Press and release R keyOperation Multi Platform Mac, Sun, Win and Multi Language SetupOperation OperationKeyboard Platform 1. Bring the KVM focus to the desired port Operation2. Invoke Hotkey Mode See Page 3. Press and release the appropriate function key see tableUsing a PC keyboard to emulate a Sun Keyboard After completing a setting, you automatically exit Hotkey ModeOperation Operation Using a PC keyboard to emulate a Mac KeyboardUSB Reset List Hotkey Settings3. Press F4 to ‘paste’ the KVM configuration on your text editor OperationLED Display Table Appendixand is being accessed in Auto Scan Mode ActivitySpecification Technical Support Radio & TV Interference Statement Limited Warranty Contact info