Manuals / IOGear / Computer Equipment / Computer Drive

IOGear GCS632U installation manual List Hotkey Settings, USB Reset, Operation

Models: GCS632U

1 33

Download 33 pages 1.27 Kb

Page 27

Image 27

Operation

List Hotkey Settings

To see a list of the current hotkey settings, do the following:

1.Open a text editor (such as Notepad, Textedit, or Word)

2.Invoke Hotkey Mode (See Page 11-13)

3.Press F4 to ‘paste’ the KVM configuration on your text editor

USB Reset

If the USB loses focus and needs to be reset, do the following:

1.Invoke Hotkey Mode (See Page 11- 13)

2.Press and release F5 function key

Page 27

Image 27

IOGear GCS632U List Hotkey Settings, USB Reset, Operation, Press F4 to ‘paste’ the KVM configuration on your text editor

Contents

2-Port KVM Switch with Built-in KVM Cables and Audio Support Installation Manual GCS632UMiniView Micro USB Plus 2005 IOGEAR. All Rights Reserved. PKG-M0089b Welcome Table of Contents If any items are damaged or missing, please contact your dealer Package Contents1 Quick Start Guide 1 Warranty Registration Card This package containsOverview Overview the Mac or Sun keyboard as the console keyboard, or with a standard PC key- board. When use a PC keyboard, a special set of hot keys are designated to emulate the Mac and Sun special keysFeatures Audio RequirementsConsole ComputersIntroduction 1. Port LEDs Refer to Appendix for LED indications 2. KVM Cables3. Console Ports 4. Speaker Jack Step InstallationInstallation Step4. Repeat the above step for your second computer PC keyboard 3Operation4Hotkey Operation Scroll LockPort Switching Hotkey Setting Mode HSMOperation PC keyboard OperationNum Lock Minus1. Press and hold Clear key for two seconds OperationOperation Clear MinusMac keyboard 2. Press and release the computer’s port number 1 or 3. Press Enter Switching PortsOperation 1. Invoke Hotkey Mode See pageOperation Alternate Hotkey Invocation KeysOperation Alternate Port Switching Keys1. Invoke Hotkey Mode See Page 2. Press and release R key 3. Press Enter The GCS632U’s factory default settings are as followsRestore Defaults OperationOperation Multi Platform Mac, Sun, Win and Multi Language SetupOperation OperationKeyboard Platform 3. Press and release the appropriate function key see table Operation1. Bring the KVM focus to the desired port 2. Invoke Hotkey Mode See PageUsing a PC keyboard to emulate a Sun Keyboard After completing a setting, you automatically exit Hotkey ModeOperation Operation Using a PC keyboard to emulate a Mac KeyboardOperation List Hotkey SettingsUSB Reset 3. Press F4 to ‘paste’ the KVM configuration on your text editorActivity AppendixLED Display Table and is being accessed in Auto Scan ModeSpecification Technical Support Radio & TV Interference Statement Limited Warranty Contact info