Charge Battery
Plug the USB cable into the mouse and the available USB port of the computer, it will start charging. We do recommend that users charge the battery for 10 hours before using the mouse in the first time.
During charging, all 5 battery charging indicators will blink. Once the battery is fully charged, all indicators will turn off.
Note: To continuously charge the mouse via the USB cable, user’s computer must be turned on or in standby mode.
Installation
1.Make sure the mouse is turned on. When you are on the go, turn the mouse off to preserve battery life.
2.To make the mouse discoverable by the computer, press the connect button on the bottom of the mouse. The blue LED will flash at the sensor hole. It means the mouse is under pairing mode.
3.Make sure that your computer is enabled for a Bluetooth device. If there is a wireless switch on the computer, be sure it is turned on.
4.Open the Bluetooth program and run the wizard to add a Bluetooth device. On most computers, the Bluetooth is found either in Control Panel or on the Start menu. Examples:
a.Some notebook computers: Start > Control Panel > Bluetooth Devices.
b.Other notebook computers: Start > All Programs > Bluetooth > Bluetooth Settings.
