IOGear GUWH104KIT manual Device Overview

Device Overview

1.	Host Selection button	4.	Switch 1	(S1)	Top View:
2.	Active Host LEDs	5.	Switch 2	(S2)

3.Power LED

The default and recommended setting is to operate in Auto Association mode. In this mode, the Wireless USB Hub will automatically connect to the Wireless USB Host Adapter.

The Host Selection button is used in Manual Association mode.
This mode is only needed if your Wireless USB Hub has already				1
been successfully associated with more than one Wireless				2
USB Host Adapter-PC combination. The Wireless USB Hub
can support up to three such associations. Set S2 to Manual				Side View:
Association mode and then use the Host Selection button to
manually cycle through the three choices for which Wireless
USB Host Adapter-PC combination to connect to. Using this				WIRED
button, you can force the Wireless USB Hub to connect to one				HUB
of three pre-associated PCs of your choosing.
	S1	S2
Wired	Wireless	Auto	Manual	4
	(recommended)	(recommended)

9

3

WIRELESS AUTO

5

MANUAL

ASSOC.