5.Select RAID size. Press Enter.
6.Press Y to save your settings.
7.Press CTRL+E and then press Y to exit the setup.
8.Continue with conventional Fdisk and Format steps to prepare the hard drives.
9.Your RAID hardware configuration is complete. Proceed to software installation section.
Creating Mirrored Sets (RAID 1)
1.As the BIOS boots, Press CTRL+S or F4 to enter the RAID bios utility.
2.Select Create RAID set. Press Enter.
3.Select RAID 1 then press Enter.
4.Select Auto configuration. Press Enter.
5.Press Y to save your settings.
6.Press CTRL+E and then press Y to exit the setup.
7.Continue with conventional Fdisk and Format steps to prepare the hard drives.
8.Your RAID hardware configuration is complete. Proceed to software installation section.
15
