Creating a Mirrored-Striped Set (RAID 10)
1.As the BIOS boots, press CTRL+S or F4 to enter the RAID bios utility.
2.Select Create RAID set. Press F2.
3.Select RAID 10 then press Enter.
4.Select Auto configuration. Press Enter.
5.Press Y and then press ESC to exit the setup.
7.Continue with conventional Fdisk and Format steps to prepare the hard drives.
8.Your RAID hardware configuration is complete. Proceed to software installation section.
Creating Parity RAID (RAID 5)
1.As the BIOS boots, Press CTRL+S or F4 to enter the RAID bios utility.
2.Select Create RAID set. Press Enter.
3.Select RAID 5 then press Enter.
4.Select Auto configuration. Press Enter.
5.Press Y to save your settings.
16
