Light

Condenser

Arm

Reflection Microscopy

Light is reflected off the sample. (For opaque samples)

Step 1. Setting the sample.

Follow the steps 1-3 of Transmission Microscopy.

Step 2. Setting up the light source.

Adjust the condenser arm so that the condenser focuses on flashlight beam on top of the sample (see yellow arrow).

Step 3. Focusing the microscope.

Look through the eyepiece and focus image by slowly raising the stage using the focusing knob.

Setting up the Electronic Eyepiece

USB Eyepiece

(For viewing on computer)

Installing Electronic Eyepiece

Step 1. Remove the regular eyepiece from the monocular. Insert the USB Eyepiece into the monocular tube.

Step 2. Connect the electronic eyepiece to the computer via USB cord.

Step 3. Install driver and software (see instructions on next page).

Monocular

Page 5
Image 5
iOptron 6850 Reflection Microscopy, Setting up the Electronic Eyepiece, Setting the sample, Installing Electronic Eyepiece