Gas Piping Installation

GAS PIPING INSTALLATION

1. The installation must conform with local codes, or in the absence of local codes with the National Fuel

Gas Code as, ANSI Z223.1 or the CAN/CGA- B149, Installation Codes.

2. Check identification nameplate for type of gas for dryer.

3. Check the altitude of dryer.

4. Check with utilities company for proper gas pressure and gas supply line.

5. Natural gas only—check the gas pressure inlet supply to dryer, 11” water column (27.4 mbar) maximum. Manifold pressure—3.5” water column (8.8 mbar) pressure .

6. L.P. gas only—manifold pressure—13” water column (32.4 mbar) maximum.

CAUTION: Low gas pressure and intermittent gas will cause gas ignition problems and inadequate drying of laundry.

Page 14