OPERATING INSTRUCTION - DOUBLE TIMER

OPERATING

INSTRUCTIONS

-DOUBLE TIMER MODELS

1. After loading the dryer with water washed clothes, close the loading door.

2. Turn the 60 minute drying (heat) timer to the desired time.

3. Turn the 60 minute cooling (air) to the desired time.

4. Select the temperature desired: Low, Medium, or High.

HIGH HEAT

175° F (80° C) exhaust temperature, heavy fabrics and hard to dry, such as cottons, towels, denim, etc..

PERMANENT PRESS (medium)

155° F (69° C) exhaust temperature, synthetic blends, including a mixed wash load.

LOW HEAT

135° F (58° C) exhaust temperature, delicate, sheer fabrics.

5. Press the “push to start” button to start the drying cycle. The heat or drying light will stay on until the drying cycle is completed

6. At the end of the drying cycle, the cool down cycle will automatically count down until all time runs out. The cool down light will stay on until the end of the cycle.

7. Drying cycle will not start unless a few minutes of the cool-down cycle are set on the cool-down timer.

8. To shut the dryer off at any time during the cycles by opening the door.

Page 28