IRiver H140 instruction manual Connecting the Player to External Audio Source, Recording

MEMORY DELETE FUNCTION (Delete saved channels)

Select the channel to be deleted at preset mode.

Press and hold the memory button.

-The next channel will appear when channel deletion is completed. Push the MEMORY button if you want to delete the next channel also.

FM Tuner reception may vary in different areas.

While in Preset mode, Auto Scan and Auto Memory functions are not available.

When the player does not have any preset channels, EMPTY will be blinking at preset mode.

CONNECTING THE PLAYER TO EXTERNAL AUDIO SOURCE

Connect the stereo cable to the LINE IN jack on the H140 and to the LINE OUT or Headphone jack of an external audio device.

If the external audio device has an Optical output, connect an Optical cable to the Optical Out jack on the external device and to the Optical In jack on the H140.

When recording by using the external microphone, connect the external microphone to the Line-In jack.

RECORDING

Press the REC button to activate recording standby mode.

Press A-B/MODE button or push the REC switch toward SOURCE/TYPE to select the source to record

-To record voice with internal microphone : INT.MIC

-To record voice with the external microphone: EXT.MIC

-To record from an external audio device with an Optical Out: OPTICAL.

-To record from an external audio device with a standard Line Out or Headphone jack: LINE-IN

Push the MENU/NAVI handle toward or ,or push the REC button on the remote control toward SOURCE/TYPE to select FILE TYPE to save.

32 33