Connecting player
Charging with AC Adapter
1 Use only the AC Power Adapter supplied with the player for safety.
2 Connect the AC adapter to the 5.0V DC jack on the player first and then into AC outlet. (AC adapter of this player is for 100~240V, 50~60Hz.)
3 The player will charge automatically when the player turns on after connecting the AC adapter to the player. (Refer to page 17~18 for details)
Using the Controls
Using the rechargeable Batteries
1 Open the battery cover on the inside of the player.
2 Insert rechargeable batteries(Stick type x 2ea) matching + and - and close the battery cover.
When the battery level is low
It beeps every 10 minutes. ( Beep sound can be on/off. For details, please refer to page 54)
Connecting player
Using the External Battery Pack
1 Open the battery cover on the external battery pack as below figure. 
Inserting batteries
2 Connect the external battery pack as shown in the right figure.
CAUTION! | AA size battery x 4EA |
|
Do not use mixed with new batteries and used batteries.
Do not use different types of batteries together.
When the batteries are not to be used for a long time, remove them.
If battery leaks, remove them.
If battery leaks, wipe off any residue in the battery compartment and insert new batteries.
Do not recharge a normal battery.
The internal and external batteries are used simultaneously, the batteries can be charged according to batteries’ condition.
Connect Remote control / Earphones
1 Connect remote control cable to the player as shown on below diagram. 2 Connect earphone to the earphones jack of remote control.
Using the Controls
15 | 16 |
